| Issue |
E3S Web Conf.
Volume 53, 2018
2018 3rd International Conference on Advances in Energy and Environment Research (ICAEER 2018)
|
|
|---|---|---|
| Article Number | 03068 | |
| Number of page(s) | 4 | |
| Section | Environment Engineering, Environmental Safety and Detection | |
| DOI | https://doi.org/10.1051/e3sconf/20185303068 | |
| Published online | 14 September 2018 | |
Study on the Acoustic Characteristics of Rocks and Fracability in Wunan Oilfield
1
Research Institute of Drilling and Production technology in Qinghai Oilfield of China Petroleum
2
Southwest Petroleum University, school of oil and gas engineering, Chendu, 610500 Key research project “Key technology research for fine adjustment and enhanced oil recovery in old oil fields in Qaidam Basin” led by PetroChina Co Ltd.
* Corresponding author: Hu Yongquan, 201622000288@stu.swpu.edu.cn
The acoustic characteristics under P&S wave velocity of 56 samples from Low Youshashan Formation in Wunan Oilfield were tested by SCMS-E high temperature and high pressure core multi parameter test instrument, the measured velocity ratio of P wave and S wave is 1.32-1.67 and the conversion between the P and S wave velocity of rock sample was established. The corresponding dynamic elastic modulus and Poisson's ratio were obtained on the base of the elastic wave propagation theory formula. So, according to the transformation relationship between static and dynamic mechanical parameters, rock brittleness index is calculated and average value is only equal to 38. Therefore, it is difficult to form a fully developed network model during the hydraulic fracturing. These achievements provide a guiding significance for fracturing development at Low Youshashan Formation in Wunan Oilfield.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.