| Issue |
E3S Web Conf.
Volume 56, 2018
VII International Scientific Conference “Problems of Complex Development of Georesources” (PCDG 2018)
|
|
|---|---|---|
| Article Number | 03022 | |
| Number of page(s) | 7 | |
| Section | Problems of Complex Processing of Mineral Raw Materials and New Technologies of Mineral Processing | |
| DOI | https://doi.org/10.1051/e3sconf/20185603022 | |
| Published online | 26 September 2018 | |
Mechanical-chemical activation using solutions containing active oxygen species
Mining Institute of Far eastern branch of Russian Academy of Sciences, Khabarovsk, Russia
* Corresponding author: nauka22@yandex.ru
The experimental studies of gold leaching from the cyanidation cakes for one of the Far East region deposits is shown in the article. Carbonate-cyanide and hypochlorite-chloride reagents were used for leaching and were electro-photo activated before leaching. Preoxidation of mineral matter by sulfate-peroxide solution were carried out. The mechanical-chemical activation of mineral material was carried out for gold increased extraction. Mechanical activation provided both better cake grinding and formation of micro cracks in the quartz and adular grains. The impact provides the liberation of dispersed nano-sized gold. The change in the granulometric characteristics of initial samples was considered from the upper, middle and lower horizons of the tailing dump as a result of complex physical-chemical effects. It was established that the gold reprecipitated on new activated surfaces of quartz and clay-mica minerals during the leaching process (for the samples of the lower and middle tailing horizons). Carbon in pulp (CIP) technology after the first stage of mechanical activation ensures a loss reduction of the valuable component.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.