| Issue |
E3S Web Conf.
Volume 63, 2018
Seminary on Geomatics, Civil and Environmental Engineering (2018 BGC)
|
|
|---|---|---|
| Article Number | 00013 | |
| Number of page(s) | 5 | |
| DOI | https://doi.org/10.1051/e3sconf/20186300013 | |
| Published online | 14 November 2018 | |
Accuracy analysis of 3D model obtained by photogrammetric method on the example of historic room from Wisłoujście Fortress
Gdansk University of Technology, Faculty of Civil and Environmental Engineering, 80233 Gdansk, Poland
* e-mail: tadwid@pg.edu.pl
The article presents a comparison of obtained models of a test object. Close range photogrammetry was used to obtain 3D models. As test object was used one of the rooms located in Wisłoujście Fortress in Gdańsk, Poland. Different models were obtained by using different distribution and number of reference points. Article contains analysis of differences between coordinates of control points obtained from total station measurements and estimated from different 3D models.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.