Issue |
E3S Web Conf.
Volume 73, 2018
The 3rd International Conference on Energy, Environmental and Information System (ICENIS 2018)
|
|
---|---|---|
Article Number | 05018 | |
Number of page(s) | 3 | |
Section | Environmental Technology and Pollution Control | |
DOI | https://doi.org/10.1051/e3sconf/20187305018 | |
Published online | 21 December 2018 |
Preliminary Study of Contamination Wastewater on Environment in Slaughterhouse of Merauke City
Department of Animal Science, Faculty of Agriculture Musamus University, Merauke, Indonesia
* Corresponding author: nurcholis@unmus.ac.id
The purpose of this research is to know the contamination of waste water that happened in slaughterhouse (RPH) city of merauke. Data were obtained based on surveys and field observations and the sample used was RPH water waste each in repeat as many as 6 replications. Data analysis was done descriptively by comparing the result obtained with the standard of quality which have been determined. The results showed that the contamination of waste water all exceeded the quality standard except at pH value. The ALT content of wastewater in RPH 2790 x 104 and contains E. Coli and Salmonella microbes. The high content of BOD, COD, TTS, Ammonia and microbial contamination is thought to be due to the absence of wastewater treatment installation (IPAL) at RPH in accordance with the standard. Proper handling of ammonia waste can reduce the amount of carbon in the atmosphere.
Key words: waste quality standards / microbial contamination / slaughterhouse
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.