| Issue |
E3S Web Conf.
Volume 100, 2019
11th Conference on Interdisciplinary Problems in Environmental Protection and Engineering EKO-DOK 2019
|
|
|---|---|---|
| Article Number | 00071 | |
| Number of page(s) | 7 | |
| DOI | https://doi.org/10.1051/e3sconf/201910000071 | |
| Published online | 10 June 2019 | |
Analysis of flow resistance in bundles of power plant condensers
1 Warsaw University of Technology, Faculty of Power and Aeronautical Engineering Institute of Heat Engineering, ul. Nowowiejska 21/25, 00-665 Warsaw, Poland
2 S.Seifullin Kazakh AgroTechnical University, Faculty of Power Engineering, Department of Heat Power Engineering, Zhenis avenue 62, 010011 Astana, Republic of Kazakhstan,
* Corresponding author: jakub.kajurek@itc.pw.edu.pl
Shell-side pressure drop is a very important variable in the successful design of the condensers. The prediction of this pressure drop through the horizontal tube banks, with condensation, has long been a problem facing design engineers. Low pressure drop is a requirement in designing condensers for power plants. The paper presents a comparison of the various correlation to determine the pressure drop in the tube bundle. It is an important element for the verification of numerical simulations. Analysis of flow resistance for power plant condenser were made.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.