| Issue |
E3S Web Conf.
Volume 126, 2019
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2019)
|
|
|---|---|---|
| Article Number | 00042 | |
| Number of page(s) | 7 | |
| DOI | https://doi.org/10.1051/e3sconf/201912600042 | |
| Published online | 30 October 2019 | |
Development and justification of the parameters of the coulter group of grain drills
Ulyanovsk State Agricultural University named after P. A. Stolypin,
Ulyanovsk,
RUSSIA
* Corresponding author: kurushin.viktor@yandex.ru
The urgency of creation and use of resource-saving means of mechanization of agriculture is proved. Proposed grain drill, performing the sowing of grain crops on stubble background. Its use allows to sowseeds in the soil with minimum costs due to the reduction of the number of technological operations. The theoretical substantiation of the grain seeder, on the basis of which the optimal design and operating parameters are revealed, is carried out.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.