| Issue |
E3S Web Conf.
Volume 126, 2019
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2019)
|
|
|---|---|---|
| Article Number | 00043 | |
| Number of page(s) | 8 | |
| DOI | https://doi.org/10.1051/e3sconf/201912600043 | |
| Published online | 30 October 2019 | |
Separator design optimization for collecting the finely dispersed particles from the gas flows
Kazan State Power Engineering University,
420066,
Kazan,
Krasnoselskaya str., 51,
Russia
* Corresponding author: vadd_93@mail.ru
This paper deals with the problem of gas flow purification from the finely dispersed particles, which is becoming significantly important nowadays due to the growth of production capacities. The authors developed a separator in order to solve this problem. This paper shows the design scheme of device and the principle of its operation. The authors studied the changes in the pressure losses within the device at different inlet rate of gas flow, as well as different parameters of finely dispersed particles: density and size. The studies show that in order to improve the quality of gas flow purification from the finely dispersed particles, it is necessary to increase the energy costs due to an increase in the pressure loses in the separator.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.