Issue |
E3S Web Conf.
Volume 135, 2019
Innovative Technologies in Environmental Science and Education (ITESE-2019)
|
|
---|---|---|
Article Number | 01032 | |
Number of page(s) | 9 | |
Section | Environmental Engineering | |
DOI | https://doi.org/10.1051/e3sconf/201913501032 | |
Published online | 04 December 2019 |
Investigation of interaction of particles of pollution and gas bulb in flotation of wastewater waters
Kerch State Maritime Technological University, 98309, 82, Ordzhonikidze Street, Kerch, Ukraine
* Corresponding author: esiap@mail.ru
The interaction of phases is at the basis of many technologies in different industries. Flotation method is used in wastewater treatment plants to capture and remove contaminants from wastewater. In this case, the interaction of air bubbles with particles of pollution with a hydrophobic surface. These interactions are very difficult to investigate because they are dynamic, subject to a large number of physical and chemical factors, and occur on a small scale. The processes mentioned above have traditionally been studied by laboratory experiments. These tests are tedious and time-consuming and show unsatisfactory accuracy. Analytical studies give idealized results. One of the most powerful alternatives for solving this problem is numerical modeling, which combines dynamics, accuracy and consideration of sophisticated details. This model is based on the discrete elements method. In this paper, a computer model for modeling the kinetics of the interaction of phases in wastewater treatment is considered.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.