Issue |
E3S Web Conf.
Volume 79, 2019
International Symposium on Architecture Research Frontiers and Ecological Environment (ARFEE 2018)
|
|
---|---|---|
Article Number | 01007 | |
Number of page(s) | 7 | |
Section | Analysis of Architecture Materials Performance and Landscape Design | |
DOI | https://doi.org/10.1051/e3sconf/20197901007 | |
Published online | 15 January 2019 |
Experimental Study on the Characteristics of Fire Smoke Movement in Ultra Thin and Tall Atriums by Hot Smoke Test
1
University of Science and Technology Beijing, Department of Safety Science and Engineering, 100083 Beijing, China
2
China Academy of Building Research, Insititute of Building Fire Research, 100013 Beijing, China
* Corresponding author: ducuifeng@126.com
The characteristics of smoke natural filling in ultra thin and tall atriums were investigated by hot smoke test method. For the fire located on the atrium ground, the smoke touched the side wall first and then extended both upwards and downwards. The smoke plume rising velocity variation can be divided into four stages, different from the normal law in large spaces. In the very early stage of natural filling, the smoke concentration near the height of wall touching point was highest and maintained at a high level in the whole process. The linear trend of temperature increasing in plume center above the height of touching point was broken, far less than the theoretical predictions, which verified the enhancement effect of boundary heat exchange caused by plume restriction. The variation tendencies of smoke density and temperature were similar during the hot smoke test,and there existed a good linear relation between these two parameters. The height-width ratio was calculated as 3.2 averagely by the test results when smoke plume would likely touch atrium walls, and it was very close to the theoretically derived value. This ratio can be used as the definition condition for ultra thin and tall atriums.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.