| Issue |
E3S Web Conf.
Volume 95, 2019
The 3rd International Conference on Power, Energy and Mechanical Engineering (ICPEME 2019)
|
|
|---|---|---|
| Article Number | 01003 | |
| Number of page(s) | 4 | |
| Section | Manufacturing Engineering | |
| DOI | https://doi.org/10.1051/e3sconf/20199501003 | |
| Published online | 13 May 2019 | |
Active Noise Control proposal design enhanced because of using sensors/actuators based on nanostructures
1
TU Ilmenau University of Technology, Institute of Physics and IMN MacroNano, Germany
2
Pontificia Universidad Católica del Perú Energy Laboratory and Mechatronic Departament, Perú
* Corresponding author: alan.calderon@pucp.edu.pe
Big machines and motors, that under operating work produces high decibels of noise in wide range of work, these values are near 90 dB that is not healthy for humans. Normally, it is used passive mechanisms to attenuate noise such as big headphones. However that solution is not enough when noise has changes in frequency domain. Therefore, it is proposed in this work a solution by noise cancellation with Active Mechanisms; nevertheless, we designed a hybrid algorithm improved through predictive/adaptive concurrent algorithms strategies, with Active Noise Cancellation (ANC). By other side, based on nanostructures, it has been analyzed the effect in robustness and wide range of work by frequency domain in order to enhance noise cancellation.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.