Free Access to the whole issue

E3S Web of Conferences

Volume 95 (2019)

The 3^rd International Conference on Power, Energy and Mechanical Engineering (ICPEME 2019)

Prague, Czech Republic, February 16-19, 2019
R.K. Agarwal (Ed.)

Export the citation of the selected articles Export
Select all

Open Access

Statement of Peer review

Published online: 13 May 2019

PDF (63.1 KB)

Open Access

Preface 00001

Mário S. Ming Kong

Published online: 13 May 2019

DOI: https://doi.org/10.1051/e3sconf/20199500001

Manufacturing Engineering

Open Access

Machinability of SMART Forging Process Materials in Intermittent Cutting: 2nd Report : Machinability in Normal Cutting Region and Selection of Optimum Cutting Condition 01001

Mitsuaki Murata, Makoto Hino, Ryoichi Kuwano and Syuhei Kurokawa

Published online: 13 May 2019

DOI: https://doi.org/10.1051/e3sconf/20199501001

Open Access

Magnetic Bearing Proposal Design for a General Unbalanced Rotor System enhanced because of using sensors/actuators based in nanostructures 01002

Jesus A. Calderón, Eliseo B. Barriga, Roland Mas, Luis Chirinos, Enrique Barrantes, Jorge Alencastre, Julio C. Tafur, Oscar Melgarejo, John H. Lozano, Bjorn Heinrich et al. (2 more)

Published online: 13 May 2019

DOI: https://doi.org/10.1051/e3sconf/20199501002

Open Access

Active Noise Control proposal design enhanced because of using sensors/actuators based on nanostructures 01003

Jesus A. Calderón, Julio C. Tafur, Eliseo B. Barriga, Roland Mas, Luis Chirinos, Enrique Barrantes, Jorge Alencastre, Oscar Melgarejo, John H. Lozano, Bjorn Heinrich et al. (2 more)

Published online: 13 May 2019

DOI: https://doi.org/10.1051/e3sconf/20199501003

Open Access

Node scheduling in heterogeneous IoT systems with cluster topology 01004

Xu Luo and Jun Yang

Published online: 13 May 2019

DOI: https://doi.org/10.1051/e3sconf/20199501004

Open Access

Status recognition for fused deposition modeling manufactured parts based on acoustic emission 01005

Feng Li, Zhonghua Yu, Xuanwei Shen and Hao Zhang

Published online: 13 May 2019

DOI: https://doi.org/10.1051/e3sconf/20199501005

Open Access

Crane Cabins Development - Are there Innovations Needed? 01006

Vesna Spasojevic Brkić, Zorica Veljković and Aleksandar Brkić

Published online: 13 May 2019

DOI: https://doi.org/10.1051/e3sconf/20199501006

Open Access

Identifying and evaluating flexible approaches for automobile body production areas 01007

Achim Kampker, Georg Bergweiler, Marian Bichler, Jan Ole Hansen, Tobias Christian Paulus and Thomas Eser

Published online: 13 May 2019

DOI: https://doi.org/10.1051/e3sconf/20199501007

Open Access

Usage of the VORNE 800XL production monitoring and indicator visualization system for the development of the project "Effect in a minute“ 01008

Jakub Liszcz and Klaudia Drobek

Published online: 13 May 2019

DOI: https://doi.org/10.1051/e3sconf/20199501008

Energy and Power System

Open Access

A Cascaded Algorithm Incorporating Knowledge Transfer Q-learning and Interior Point Method for Coordinated Operation of Integrated Energy System 02001

Yuan Jianhua, Li Haofei, Ji Chenyu and Ji Yu

Published online: 13 May 2019

DOI: https://doi.org/10.1051/e3sconf/20199502001

Open Access

Improving Accuracy of Wind Analysis with Multiple Sampling Rates of Wind Measurement 02002

Natapol Korprasertsak and Thananchai Leephakpreeda

Published online: 13 May 2019

DOI: https://doi.org/10.1051/e3sconf/20199502002

Open Access

Effect of External Magnetic Field on Dynamics of Two-dimensional Isotropic Conducting Flow 02003

Mahzad Chitsaz and Mani Fathali

Published online: 13 May 2019

DOI: https://doi.org/10.1051/e3sconf/20199502003

Open Access

Numerical analysis of heat transfer in air-water heat exchanger with microchannel coil 02004

Vladimir Glazar, Anica Trp, Kristian Lenic and Fran Torbarina

Published online: 13 May 2019

DOI: https://doi.org/10.1051/e3sconf/20199502004

Open Access

Removal of aqueous Clopyralid by Photoctalytic-ozonation process on Activated carbon under solar radiation: Catalyst characterization and kinetic study 02005

Zouhour Rajah, Monia Guiza, Francisco Javier Rivas Toledo and Abdelmottaleb Ouederni

Published online: 13 May 2019

DOI: https://doi.org/10.1051/e3sconf/20199502005

Open Access

Research of lightning transient potential on the jacket foundation offshore wind turbines 02006

Shiqi Tao, Ximei Yao, Bojing Liu, Xiaoqing Zhang and Yaowu Wang

Published online: 13 May 2019

DOI: https://doi.org/10.1051/e3sconf/20199502006

Open Access

System identification analysis for an air compressor system and enhancement proposal by sensors based in nanostructures 02007

Jesus A. Calderón, Cesar J. Valdivia, Roland Mas, Luis Chirinos, Enrique Barrantes, John H. Lozano and Juan C. Lengua

Published online: 13 May 2019

DOI: https://doi.org/10.1051/e3sconf/20199502007

Open Access

Converting an automobile turbocharger into a micro gas turbine 02008

M Usman Butt

Published online: 13 May 2019

DOI: https://doi.org/10.1051/e3sconf/20199502008

Open Access

Benchmark on the Dynamics of Liquid Draining Inside a Tank 02009

Fadhilah Mohd Sakri, Mohamed Sukri Mat Ali and Sheikh Ahmad Zaki

Published online: 13 May 2019

DOI: https://doi.org/10.1051/e3sconf/20199502009

Open Access

The Expansion Motor of Tarek Soukar Is a Real Global Warming Reducer 02010

Tarek R. Socar

Published online: 13 May 2019

DOI: https://doi.org/10.1051/e3sconf/20199502010

Open Access

Relationship between Spacing Rasio and Stiffness Coefficient by Using Smoothed Particle Hydrodynamics Method to Simulate Water – Solid Interaction 02011

Anisa Wulandari, R.R Dwinanti Rika, Jessica Sjah and Herr Soeryantono

Published online: 13 May 2019

DOI: https://doi.org/10.1051/e3sconf/20199502011

Control System

Open Access

A Multi-objective Optimization Algorithm for Multiple Home Users Intelligent Power Management and Control Based on Pareto and Nash Equilibrium Game 03001

Zhou Yu, Hu Weifeng, Wang Dezhi, Xu Zheng and Yu Tao

Published online: 13 May 2019

DOI: https://doi.org/10.1051/e3sconf/20199503001

Open Access

A robust and fast sliding mode controller for position tracking control of permanent magnetic synchronous motor 03002

Junfeng Jiang and Xiaojun Zhou

Published online: 13 May 2019

DOI: https://doi.org/10.1051/e3sconf/20199503002

Open Access

Control of mechatronic drives considering the type and number of the nonlinearities of a mechanical converter 03003

Ricardo Tellez, Valentin Morozov, Alexey Zhdanov, Elena Novikova and Dmitryi Gavrilov

Published online: 13 May 2019

DOI: https://doi.org/10.1051/e3sconf/20199503003

Open Access

Modelling, design and analysis of three controllers based on LQR formulation for a non-linear hydraulic uniaxial seismic shake table 03004

José Luis Sarmiento and Carlos Borrás Pinilla

Published online: 13 May 2019

DOI: https://doi.org/10.1051/e3sconf/20199503004

Open Access

Comparison of PFC Controllers for Heating Process 03005

Piotr Laszczyk

Published online: 13 May 2019

DOI: https://doi.org/10.1051/e3sconf/20199503005

Open Access

An Investigation of a Nonlinear Fuel Oil Viscosity and Temperature Control System for Ships 03006

Zhuohang Ye, Xiaobing Mao, Hai Huang and Xianzhen Liu

Published online: 13 May 2019

DOI: https://doi.org/10.1051/e3sconf/20199503006

Open Access

A Short-baseline Dual-antenna BDS/MIMU Integrated Navigation System 03007

Tijing Cai, Qimeng Xu, Shuaipeng Gao and Daijin Zhou

Published online: 13 May 2019

DOI: https://doi.org/10.1051/e3sconf/20199503007

Open Access

An Improved Genetic Algorithms for Multi-objective Hybrid Flow-shop Scheduling Problem 03008

Zhao Zijin, Wang aimin, Ge Yan and Lin Lin

Published online: 13 May 2019

DOI: https://doi.org/10.1051/e3sconf/20199503008

Materials Science and Engineering

Open Access

Cylinder liner deformation orders and efficiency of a piston ring-pack 04001

Erjon Selmani, Cristiana Delprete and Arian Bisha

Published online: 13 May 2019

DOI: https://doi.org/10.1051/e3sconf/20199504001

Open Access

ROS-based localization of a race vehicle at high-speed using LIDAR 04002

Tim Stahl, Alexander Wischnewski, Johannes Betz and Markus Lienkamp

Published online: 13 May 2019

DOI: https://doi.org/10.1051/e3sconf/20199504002

Open Access

Factors Affecting the Mechanical Properties Variation after Annealing Of Cold Rolled Steel Sheet 04003

Ruangyot Wichienrak and Somchai Puajindanetr

Published online: 13 May 2019

DOI: https://doi.org/10.1051/e3sconf/20199504003

Open Access

Determination of the critical points in solid-state phase transformation of some hypoeutectoid steels 04004

Constantin Dulucheanu, Traian Lucian Severin, Alexandru Potorac and Luminita Irimescu

Published online: 13 May 2019

DOI: https://doi.org/10.1051/e3sconf/20199504004

Open Access

Synthesis of AlMgB₁₄: Effect of modes of mechanical activation of the raw powders on the properties of obtained materials 04005

Pavel Nikitin, Ilya Zhukov and Vladimir Platov

Published online: 13 May 2019

DOI: https://doi.org/10.1051/e3sconf/20199504005

Open Access

Investigation of the negative influence of cooling lubricants on the deformation of the machine tool structure 04006

Christian Brecher, Filippos Tzanetos and Daniel Zontar

Published online: 13 May 2019

DOI: https://doi.org/10.1051/e3sconf/20199504006

Open Access

A Tabu-Genetic Hybrid Search Algorithm for Job-shop Scheduling Problem 04007

Yan Ge, Aimin Wang, Zijin Zhao and Jieran Ye

Published online: 13 May 2019

DOI: https://doi.org/10.1051/e3sconf/20199504007

Open Access

BP Neural Network Algorithms for Fault Diagnosis of Microwave Components 04008

Gao Kun, Wang Aimin and Ge Yan

Published online: 13 May 2019

DOI: https://doi.org/10.1051/e3sconf/20199504008

E3S Web of Conferences

Volume 95 (2019)

The 3rd International Conference on Power, Energy and Mechanical Engineering (ICPEME 2019)

Statement of Peer review

Preface 00001

Manufacturing Engineering

Machinability of SMART Forging Process Materials in Intermittent Cutting: 2nd Report : Machinability in Normal Cutting Region and Selection of Optimum Cutting Condition 01001

Magnetic Bearing Proposal Design for a General Unbalanced Rotor System enhanced because of using sensors/actuators based in nanostructures 01002

Active Noise Control proposal design enhanced because of using sensors/actuators based on nanostructures 01003

Node scheduling in heterogeneous IoT systems with cluster topology 01004

Status recognition for fused deposition modeling manufactured parts based on acoustic emission 01005

Crane Cabins Development - Are there Innovations Needed? 01006

Identifying and evaluating flexible approaches for automobile body production areas 01007

Usage of the VORNE 800XL production monitoring and indicator visualization system for the development of the project "Effect in a minute“ 01008

Energy and Power System

A Cascaded Algorithm Incorporating Knowledge Transfer Q-learning and Interior Point Method for Coordinated Operation of Integrated Energy System 02001

Improving Accuracy of Wind Analysis with Multiple Sampling Rates of Wind Measurement 02002

Effect of External Magnetic Field on Dynamics of Two-dimensional Isotropic Conducting Flow 02003

Numerical analysis of heat transfer in air-water heat exchanger with microchannel coil 02004

Removal of aqueous Clopyralid by Photoctalytic-ozonation process on Activated carbon under solar radiation: Catalyst characterization and kinetic study 02005

Research of lightning transient potential on the jacket foundation offshore wind turbines 02006

System identification analysis for an air compressor system and enhancement proposal by sensors based in nanostructures 02007

Converting an automobile turbocharger into a micro gas turbine 02008

Benchmark on the Dynamics of Liquid Draining Inside a Tank 02009

The Expansion Motor of Tarek Soukar Is a Real Global Warming Reducer 02010

Relationship between Spacing Rasio and Stiffness Coefficient by Using Smoothed Particle Hydrodynamics Method to Simulate Water – Solid Interaction 02011

Control System

A Multi-objective Optimization Algorithm for Multiple Home Users Intelligent Power Management and Control Based on Pareto and Nash Equilibrium Game 03001

A robust and fast sliding mode controller for position tracking control of permanent magnetic synchronous motor 03002

Control of mechatronic drives considering the type and number of the nonlinearities of a mechanical converter 03003

Modelling, design and analysis of three controllers based on LQR formulation for a non-linear hydraulic uniaxial seismic shake table 03004

Comparison of PFC Controllers for Heating Process 03005

An Investigation of a Nonlinear Fuel Oil Viscosity and Temperature Control System for Ships 03006

A Short-baseline Dual-antenna BDS/MIMU Integrated Navigation System 03007

An Improved Genetic Algorithms for Multi-objective Hybrid Flow-shop Scheduling Problem 03008

Materials Science and Engineering

Cylinder liner deformation orders and efficiency of a piston ring-pack 04001

ROS-based localization of a race vehicle at high-speed using LIDAR 04002

Factors Affecting the Mechanical Properties Variation after Annealing Of Cold Rolled Steel Sheet 04003

Determination of the critical points in solid-state phase transformation of some hypoeutectoid steels 04004

Synthesis of AlMgB14: Effect of modes of mechanical activation of the raw powders on the properties of obtained materials 04005

Investigation of the negative influence of cooling lubricants on the deformation of the machine tool structure 04006

A Tabu-Genetic Hybrid Search Algorithm for Job-shop Scheduling Problem 04007

BP Neural Network Algorithms for Fault Diagnosis of Microwave Components 04008

The 3^rd International Conference on Power, Energy and Mechanical Engineering (ICPEME 2019)

Synthesis of AlMgB₁₄: Effect of modes of mechanical activation of the raw powders on the properties of obtained materials 04005