E3S Web Conf.
Volume 95, 2019The 3rd International Conference on Power, Energy and Mechanical Engineering (ICPEME 2019)
|Number of page(s)||8|
|Published online||13 May 2019|
Magnetic Bearing Proposal Design for a General Unbalanced Rotor System enhanced because of using sensors/actuators based in nanostructures
TU Ilmenau University of Technology, Institute of Physics and IMN MacroNano, Germany
2 Pontificia Universidad Católica del Perú Energy Laboratory and Mechatronic Departament, Perú
3 Northen (Artic) Federal University named after MV. Lomonosov, Arkhangelsk, Russia
* Corresponding author: firstname.lastname@example.org
Rotor systems need bearings in order to keep uniformity of rotational movement transmission. However, bearingsgenerate friction and energy losses due to heating transmisssion through the friction; for this reason, mechanicak bearings are replaced by magnetic bearings owing to avoid energy losing because of friction. We designed Active Magnetic Bearings (AMB) to transmit rotational movement from source of movement (motor) through the rotor to the movement receptor (such as a conveyor belt). Magnetic Bearings need accuracy during System Identification process and a sophisticated control algorithm to get an uniform rotation movement transmission. In this work also it was analyzed and proved by simulations that Active Magnetic Bearings composed with sensors /actuators based in nanostructures are faster and robust compared with AMB based in traditional sensors/actuators. It because, nanostructures receive and send signals better way tan traditional sensors/actuators, because of high oredered nanoarrays improve sensor/actuator properties.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.