| Issue |
E3S Web Conf.
Volume 97, 2019
XXII International Scientific Conference “Construction the Formation of Living Environment” (FORM-2019)
|
|
|---|---|---|
| Article Number | 04048 | |
| Number of page(s) | 6 | |
| Section | Reliability of Buildings and Constructions | |
| DOI | https://doi.org/10.1051/e3sconf/20199704048 | |
| Published online | 29 May 2019 | |
To determine the optimal size of the elements of complex overlap
Moscow State University of Civil Engineering, Yaroslavskoe shosse, 26, Moscow, 129337, Russia
* Corresponding author: yuliatalyzova@yandex.ru
The article discusses the possibilities of optimizing the size of elements of reinforced concrete ceilings along. The optimization of the overlap consists in finding such parameters of the reinforced concrete slab, profiled flooring and steel beams, in which their strength is fully used. For ceilings with steel beams included, the dimensions of the sections of the elements and their strength characteristics are determined by the requirements of the limit states of the second group (deflections), and the calculation of the forces in the slab and beams and strength calculations are performed taking into account the geometric and strength characteristics established from the calculation of deformations. To clarify the features of the calculation and verification of the main provisions, a numerical experiment was carried out, where the center cell of the steel concrete slab along metal rolling beams was selected as the object of study. Formulas are obtained for determining the forces using predetermined dimensions of the components of the overlap based on satisfying the requirements of the 2 groups of limit states. These studies can serve as a basis for further research on the search for optimal parameters of complex floors.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.