| Issue |
E3S Web Conf.
Volume 178, 2020
High Speed Turbomachines and Electrical Drives Conference 2020 (HSTED-2020)
|
|
|---|---|---|
| Article Number | 01023 | |
| Number of page(s) | 5 | |
| DOI | https://doi.org/10.1051/e3sconf/202017801023 | |
| Published online | 09 July 2020 | |
Cordline multi-motor electric drive with energy recovery
Kazan National Research Technological University, Institute of chemical technology, 423570 Avenue of Builders, 47, Nizhnekamsk, Republic of Tatarstan, Russian Federation
* Corresponding author: n7007@mail.ru
The article offers a variant of developing a cordline electric drive in the production of automobile tires to increase the energy-efficient due operation of production lines based on interconnected electric drives with energy recovery. The modes of operation of the technological line of cord production with energy recovery is possible in the network are shown, requirements for the drive system are drawn up. Simulations in Matlab 10, Simulink and SimPowerSystems carried out the research. The developed version of the frequency-controlled electric drive allows increasing the energy efficiency of production lines in the production technology of automobile tires by using generator modes of asynchronous motors as a part of frequency-controlled electric drives.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.