| Issue |
E3S Web Conf.
Volume 220, 2020
Sustainable Energy Systems: Innovative Perspectives (SES-2020)
|
|
|---|---|---|
| Article Number | 01069 | |
| Number of page(s) | 5 | |
| DOI | https://doi.org/10.1051/e3sconf/202022001069 | |
| Published online | 16 December 2020 | |
Two-way conductivity converters in the technology of tire cord rubberization
Kazan National Research Technological University, Institute of chemical technology, 423570 Avenue of Builders, 47, Nizhnekamsk, Republic of Tatarstan, Russian Federation
* Corresponding author: n7007@mail.ru
The article deals with the problems of increasing the multi-engine electric drive energy efficiency on the example of the cropped cord production line in manufacture of tires. There are requirements for line electric drives that can have an impact both each other and the overall power grid in the mode of technological braking, as well as the requirements for the availability of protection functions and mutual coordination with the mains supply. To solve this problem, options have been developed to build reversible frequency converters on fully controlled (locked) keys as part of frequency-regulated technological electric drives in the production of cord for car tires with energy recovery. The construction of the reversible frequency converter with the use of autonomous voltage inverters, as well as the results of computer simulations in the reactor and non-reactor circuits of reversible frequency converters in the composition of multi-motor electric drives with a total DC bus are shown.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.