Issue |
E3S Web Conf.
Volume 178, 2020
High Speed Turbomachines and Electrical Drives Conference 2020 (HSTED-2020)
|
|
---|---|---|
Article Number | 01024 | |
Number of page(s) | 4 | |
DOI | https://doi.org/10.1051/e3sconf/202017801024 | |
Published online | 09 July 2020 |
The influence of main parameters of regenerative heat exchanger on its energy efficiency
1
Vologda State University, Institute of civil engineering, 160000 Vologda Lenina str. 15, Russia
2
Kazan State Power Engineering University, Kazan, Russia
* Corresponding author: nikolay-monarkin@yandex.ru
The influence of various parameters of stationary switching regenerative heat exchangers used for ventilation on its thermal efficiency was studied. Considered are the geometric (length, diameter and wall thickness of a single equivalent nozzle channel), thermophysical (density and heat capacity of the nozzle material) and operation (air flow through the regenerator and the time of one stage of accumulation/regeneration of thermal energy) parameters.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.