| Issue |
E3S Web Conf.
Volume 178, 2020
High Speed Turbomachines and Electrical Drives Conference 2020 (HSTED-2020)
|
|
|---|---|---|
| Article Number | 01052 | |
| Number of page(s) | 5 | |
| DOI | https://doi.org/10.1051/e3sconf/202017801052 | |
| Published online | 09 July 2020 | |
Modelling of emergency modes with FACTS devices installed
1
Vologda State University, Lenina str. 15, Vologda, Russia
2
Kazan State Energy University, Krasnoselskaya str. 51, Kazan, Russia
* Corresponding author: alexu79@mail.ru
This paper considers installation of FACTS devices in a 500 kV line of substation (SS) Belozerskaya SS Vologodskaya. Three FACTS devices in emergency mode were modelled: a static reactive power compensator (STATCOM), a static synchronous series compensator, and a unified power flow control system. The parameters of MATLAB Simulink blocks were shown. The obtained results are summarized in Table, which substantiates the choice of the best device for the Belozerskaya - Vologodskaya line in emergency mode.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.