E3S Web Conf.
Volume 220, 2020Sustainable Energy Systems: Innovative Perspectives (SES-2020)
|Number of page(s)
|16 December 2020
Destruction of electrical insulating structures of electric motors during various drying techniques
Salavat Branch of Ufa State Petroleum Technological University, Gubkina Street 67, Salavat, the Republic of Bashkortostan, 453250, Russia
2 Vologda State University, Lenina Street 15, Vologda, 160000, Russia
3 Kazan State Power Engineering University, str. Krasnoselskaya, 51, 420066, Kazan, Russia
* Corresponding author: firstname.lastname@example.org
The paper discusses the problem of drying electric motors in a humid environment. The study considers the influence of oven, current, electroosmotic, convective-electroosmotic drying methods on defect formation in electrical insulating materials of electric motors. Thermal oven drying destroys the insulation system of electric motors for an order of magnitude higher than other methods and has a lot of negative consequences. The electroosmotic and convective-electroosmotic drying processes do not have disadvantages of thermal drying methods, or these disadvantages are kept to a minimum. It is shown that electroosmotic and convective-electroosmotic drying result in a uniform distribution of moisture content in the volume of electrical insulating materials. This reduces the likelihood of dangerous stresses and subsequent cracking. Electroosmotic and convective-electroosmotic drying have little effect on defect formation processes in the insulation system of electric motors and, thus, almost do not reduce the service life of electric motors.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.