| Issue |
E3S Web Conf.
Volume 218, 2020
2020 International Symposium on Energy, Environmental Science and Engineering (ISEESE 2020)
|
|
|---|---|---|
| Article Number | 01032 | |
| Number of page(s) | 7 | |
| Section | Research on Energy Technology Application and Consumption Structure | |
| DOI | https://doi.org/10.1051/e3sconf/202021801032 | |
| Published online | 11 December 2020 | |
Review and Thermodynamic Calculation of Gas-based Shaft Furnace Direct Reduction Ironmaking
Energy and Power Engineering, Xi’an Jiaotong University, 710049, China
Different techniques have been used to study the reduction process of iron ore. In this paper, the reduction process of iron ore by CO at 200~1200°C is calculated. The effects of reducing agent overdose, reducing temperature and VCO2/(VCO+VCO2) on reducing degree were studied. The results show that the reduction degree increases with the increase of reducing agent and slows down gradually. During the reduction process, the reduction degree decreased significantly with the increase of VCO2/(VCO+VCO2). In this temperature segment, the reduction degree has a peak.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.