Issue |
E3S Web Conf.
Volume 67, 2018
The 3rd International Tropical Renewable Energy Conference “Sustainable Development of Tropical Renewable Energy” (i-TREC 2018)
|
|
---|---|---|
Article Number | 03056 | |
Number of page(s) | 5 | |
Section | Multifunctional and Advanced Materials | |
DOI | https://doi.org/10.1051/e3sconf/20186703056 | |
Published online | 26 November 2018 |
Analysis effect of temperature on the results of titanomagnetite (Fe2TiO4-Fe3O4) formation in iron sand reduction using coal and sodium sulphate as an additive
1
Center of Minerals Processing and Corrosion Research, Department of Metallurgical and Materials Engineering, Universitas Indonesia, Depok 16424, Indonesia
2
Department of Mechanical Engineering, Politeknik Negeri Jakarta, Depok 16425, Indonesia
* Coresponding author: jwsono@metal.ui.ac.id
Indonesia is a developing country that has rich deposit of natural resources particularly in mineral ores. Many of iron sand found in coastal Indonesia that contains some valuable minerals such as hematite (Fe2O3), ilmenite (FeTiO3) sand rutile (TiO2). Research study related to iron sand has developed that aims to determine the effect of temperature against the form of titanomagnetite in reduction process using coal as reductor and sodium sulphate (Na2SO4) as an additive. The results of XRD characterization and semi- quantitative with temperature variable 700°C, 800°C and 900°C obtained that 900°C is an optimum temperature with amount of titanomagnenite (Fe2TiO4-Fe3O4) as much as 48.5.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.