| Issue |
E3S Web Conf.
Volume 220, 2020
Sustainable Energy Systems: Innovative Perspectives (SES-2020)
|
|
|---|---|---|
| Article Number | 01059 | |
| Number of page(s) | 5 | |
| DOI | https://doi.org/10.1051/e3sconf/202022001059 | |
| Published online | 16 December 2020 | |
Analysis of the effectiveness of using the block for limiting the vibrations of the load on the mechanism of movement of the bogie with various control systems
1
Lipetsk State Technical University, Lipetsk, Russia
2
Kazan State Power Engineering University, Kazan, Russia
* Corresponding author: mesherek@yandex.ru
Damping load vibrations in an electric crane drive is an urgent topic for research. The swinging load has a negative effect on the mechanical part of the device, leading to its wear, and on the entire control system as a whole. To combat the swaying of the load, it is proposed to install a vibration damping block created on the basis of an equation describing the dependence of the change in the deviation of the load on the equilibrium position in the plane of movement of the cart. The control signals in the vibration damping unit are the parameters of truck acceleration, suspension length, and weight of the load. At the output of the vibration damping unit, a speed task is formed. A block diagram of the trolley drive control system has been developed. Both scalar systems and systems with direct torque control are used on trolley travel mechanisms. The paper analyzes the efficiency of using the vibration damping unit when using different control systems on the movement mechanism of the bridge crane trolley.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.