| Issue |
E3S Web Conf.
Volume 234, 2021
The International Conference on Innovation, Modern Applied Science & Environmental Studies (ICIES2020)
|
|
|---|---|---|
| Article Number | 00006 | |
| Number of page(s) | 5 | |
| DOI | https://doi.org/10.1051/e3sconf/202123400006 | |
| Published online | 02 February 2021 | |
Review on the modeling of the laser sintering process for Polyamide 12
Laboratory of Applied Mechanics and Technologies (LAMAT), ENSET, STIS Research Center Mohammed V University, Rabat, Morocco
* Corresponding author: hanane.yaagoubi@um5s.net.ma
One of the most promising additive manufacturing techniques is selective laser sintering (SLS) of thermoplastic materials. However, the materials successfully applicable to laser sintering (LS) are very limited today. In this study the exceptional position of polyamide 12 powders is underlined. Several numerical and experimental studies have been carried out to make comparisons between the use of powdered materials for polyamide 12 and other types of polymers during the SLS process. The complexity of this process and the interaction between the different phenomena involved has not been fully understood. In this work we highlight the different models of the selective laser sintering of polyamide 12 as well as their different results in order to better understand the functioning of this process.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.