| Issue |
E3S Web Conf.
Volume 264, 2021
International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2021)
|
|
|---|---|---|
| Article Number | 04043 | |
| Number of page(s) | 8 | |
| Section | Mechanization, Electrification of Agriculture and Renewable Energy Sources | |
| DOI | https://doi.org/10.1051/e3sconf/202126404043 | |
| Published online | 02 June 2021 | |
Plant for cleaning oils from oxidation products
1 Tashkent institute of irrigation and agricultural mechanization engineers, Tashkent, Uzbekistan
2 Karshi Engineering-Economic Institute, Karshi, Uzbekistan
3 Karakalpak State University, Nukus, Uzbekistan
* Corresponding author: bahodir.1978@mail.ru
The study aims to substantiate the parameters and operating mode of the oil purification device from oxidation products to improve the efficiency of the use of lubricants. The methods of mathematical analysis and mathematical statistics, comparative comparison, generalization, and testing methods of agricultural machinery are used in the research process. It is established that engine oils are intensively polluted by oxidation products during processing, thereby accelerating the friction process due to the overload of tractor engines. During the performance of agricultural work in the oil composition, the content of oxidation products in the form of carbon, carbon dioxide, and asphalt products increases by 1.2%. Analytical coupling dependences for the process of cleaning motor oils from oxidizing products are obtained, and the dependence of the cleaning efficiency on the device parameters is established. The developed device consists of a container for collecting oils, a steam generator, a container for a sump mixer, a separate container for pure and sedimentary oils, and a vessel for re-collecting acetone. An installation has been developed to implement the technology of collecting and renewing oils in the conditions of the farm. In this case, the amount of contamination and the composition of oils is determined, and the operating mode of the device is selected for their resumption.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.