| Issue |
E3S Web Conf.
Volume 304, 2021
2nd International Conference on Energetics, Civil and Agricultural Engineering (ICECAE 2021)
|
|
|---|---|---|
| Article Number | 03033 | |
| Number of page(s) | 7 | |
| Section | Agricultural Engineering | |
| DOI | https://doi.org/10.1051/e3sconf/202130403033 | |
| Published online | 21 September 2021 | |
Processing of teeth of saw blades of cotton processing machines with a stream of compressed air with abrasive particles
Tashkent Institute of Textile and Light Industry, 100100 Tashkent, Uzbekistan
* Corresponding author: nigora1211@mail.ru
In the article, it is presented materials on abrasive blasting of teeth of saw blades of cotton processing machines with particles of black silicon carbide. The micro-profile of the surface, characterized by the height and pitch of irregularities, after microcutting with abrasive particles is able to intensify the process of fiber separation by activating the tank surfaces of the teeth. This machining process is also accompanied by deformation hardening of the surface layer of the teeth, leading to an increase in the wear resistance and durability of the saws.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.