| Issue |
E3S Web Conf.
Volume 383, 2023
International Scientific Conference Transport Technologies in the 21st Century (TT21C-2023) “Actual Problems of Decarbonization of Transport and Power Engineering: Ways of Their Innovative Solution”
|
|
|---|---|---|
| Article Number | 04025 | |
| Number of page(s) | 9 | |
| Section | Mechanical Engineering and New Energy Technologies | |
| DOI | https://doi.org/10.1051/e3sconf/202338304025 | |
| Published online | 24 April 2023 | |
Abrasive blasting of the teeth of linter saws with the aim of their activation
1
Tashkent Institute Textile and Light Industry, Street Shohdjahon, 5, 100100 Tashkent, Uzbekistan
2
Tashkent State Pedagogical University, Bunyodkor avenue, 27, 100070 Tashkent Uzbekistan
* Corresponding author: ortikov.oybek1984@mail.ru
The article presents materials on the effective use of abrasive blasting of the side surfaces of the teeth of saw blades in order to activate them during lightering. The scraping action and cutting of short fibers from seeds is enhanced by microroughnesses of the formed micro profile after impact interaction of an abrasive particle with a metal surface. Using atomic force microscopy, we obtained the height and step parameters of the roughness of the machined tooth surface, which are compared with the transverse dimensions of the cotton fibers, and thus a model for the intensification of the littering process is proposed.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.