Issue |
E3S Web Conf.
Volume 383, 2023
International Scientific Conference Transport Technologies in the 21st Century (TT21C-2023) “Actual Problems of Decarbonization of Transport and Power Engineering: Ways of Their Innovative Solution”
|
|
---|---|---|
Article Number | 04026 | |
Number of page(s) | 6 | |
Section | Mechanical Engineering and New Energy Technologies | |
DOI | https://doi.org/10.1051/e3sconf/202338304026 | |
Published online | 24 April 2023 |
Simulation of a single interaction of an abrasive particle with the surface of a part during blasting
1
Tashkent Institute Textile and Light Industry, Street Shohdjahon, 5, 100100 Tashkent, Uzbekistan
2
Tashkent State Pedagogical University, Bunyodkor avenue, 27, 100070 Tashkent Uzbekistan
* Corresponding author: zshodmonqulov@mail.ru
It is shown that when modeling a single interaction of an abrasive particle with the surface of a part in the process of collision under air (liquid) pressure, it is necessary to take into account the specifics of impact-abrasive wear, when the separation of a wear particle is preceded by metal destruction. In the process of schematization of the contact interaction during abrasive blasting, some commonality with the shot blasting process and a number of assumptions typical for grinding, when micro cutting with a single abrasive grain is considered, are taken into account.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.