| Issue |
E3S Web of Conf.
Volume 390, 2023
VIII International Conference on Advanced Agritechnologies, Environmental Engineering and Sustainable Development (AGRITECH-VIII 2023)
|
|
|---|---|---|
| Article Number | 04038 | |
| Number of page(s) | 9 | |
| Section | Green Technologies, Climate Change and Environmental Safety and Pollution | |
| DOI | https://doi.org/10.1051/e3sconf/202339004038 | |
| Published online | 01 June 2023 | |
A theoretical method of the reception of blue stem feed by the feeders and transfer to the grinding drum
1 National research university "Tashkent Institute of Irrigation and Agricultural Mechanization Engineers", 39, Street Kari Niyazi, Tashkent, 100000, Uzbekistan
2 Surkhandarya branch SE "Uzbek national institute of metrology", Uzbekistan
3 Jizzakh polytechnic institute, I. Karimov Street 4, Jizzakh city, Uzbekistan
* Corresponding author: atxamborotov@mail.ru
Uzbekistan pays a lot of attention to fisheries, poultry and animal husbandry. In fish farming, poultry and livestock rearing, it has been recommended to give green feed as a supplementary feed, which reduces the accumulation of excess fat in fish. In this regard, a grinder was produced for cutting plants with blue content. The number of rotations of the feeders was studied theoretically and experimentally in order to meet the demand of the prepared feeds. According to the theoretical research, the cutting length of blue stalk feed is achieved by changing the number of revolutions of the shredder drum depending on the feed speed Vuz and the number of blades in the drum N p , and the number of revolutions of the feeder blades when the feed is transferred at an angle of 27O is 101-207 r/ in the range of min, when the number of blades is in the range of 4-6 pieces, it is recommended that the number of rotations of the shredder drum be greater than 1358 r/min and 1478 r/min to ensure a cutting length of up to 10 mm.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.