Issue |
E3S Web of Conf.
Volume 390, 2023
VIII International Conference on Advanced Agritechnologies, Environmental Engineering and Sustainable Development (AGRITECH-VIII 2023)
|
|
---|---|---|
Article Number | 04037 | |
Number of page(s) | 7 | |
Section | Green Technologies, Climate Change and Environmental Safety and Pollution | |
DOI | https://doi.org/10.1051/e3sconf/202339004037 | |
Published online | 01 June 2023 |
Parameters of the airflow when exiting the fan
Karshi engineering-economics institute, 225, Mustakillik str., Karshi, 180100, Uzbekistan
* Corresponding author: xmuxtor83@mail.ru
The purpose study is to substantiate the parameters of the air flow when exiting the casing and the working parts fan. In the course of studies, the pressure and air flow velocity were determined by an improved Pitot-Prandtal tube. In experimental studies, the influence speed fan wheel improved sprayer on the parameters air flow when exiting the window casing and the working part was studied. It was found that the pressure air flow from the window fan casing increases on average from 65 Pa to 152 Pa when the number of revolutions wheel is increased from 800 r/min to 1200 r/min, and 5.5 times when the number of revolutions is increased from 800 r/min to 1600 r/min. The speed air flow coming out window shroud fan depends on the pressure, it was observed that the speed increased by 2.5 times when the pressure in the system increased from 100 to 350 Pa. According to the results studies carried out, in order to ensure high-quality chemical processing with low energy consumption, the number of revolutions centrifugal fan wheel should be equal to 1500 r/min.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.