| Issue |
E3S Web of Conf.
Volume 462, 2023
International Scientific Conference “Fundamental and Applied Scientific Research in the Development of Agriculture in the Far East” (AFE-2023)
|
|
|---|---|---|
| Article Number | 01034 | |
| Number of page(s) | 10 | |
| Section | Advances in Precision Livestock Farming | |
| DOI | https://doi.org/10.1051/e3sconf/202346201034 | |
| Published online | 12 December 2023 | |
Processing of cutting parts of agricultural machinery
Fergana Polytechnic Institute, 150100, Fergana, Uzbekistan
* Corresponding author: fer.sapedu@gmail.com
The article aims to develop a technology to finish cutting parts for agricultural machines. To date, prior scientific research has been conducted on finishing methods for agricultural parts, encompassing the use of carburization, nitriding, chemical-thermal treatment, and the formation of steel structures, as well as their properties. The research carried out by scientists on the processing technologies for low-carbon steels of grades 40KH, 45KHN and 55KHGR has been studied, leading to the development of new techniques. This research led to the development of new techniques. Technical abbreviations used will be explained upon their first utilization. It is important to acknowledge that the language used is unbiased in nature, and the text is devoid of filler words while exhibiting a structured and logical flow of information. Finally, precision in the choice of words is of the utmost importance, so subject-specific vocabulary was used where necessary. In light of the experimental studies, a cutting-edge technology for finishing cotton harvester segments was created that employs high-temperature carburization and high-temperature coating.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.