Open Access
Issue |
E3S Web of Conf.
Volume 462, 2023
International Scientific Conference “Fundamental and Applied Scientific Research in the Development of Agriculture in the Far East” (AFE-2023)
|
|
---|---|---|
Article Number | 01034 | |
Number of page(s) | 10 | |
Section | Advances in Precision Livestock Farming | |
DOI | https://doi.org/10.1051/e3sconf/202346201034 | |
Published online | 12 December 2023 |
- Myalenko, V. I. Tractors and Agricultural Machinery 85, 6, 22-26 (2018) [Google Scholar]
- Kolmykov, V. I., D. N. Romanenko, K. I. Abyshev, D. V. Kolmykov, and V. V. Bedin. Chemical and Petroleum Engineering 51, 58-61 (2015) [CrossRef] [Google Scholar]
- Zastempowski, M., and A. Bochat. “Innovative constructions of cutting and grinding assemblies of agricultural machinery.” In Proceeding of 6th International Conference on Trends in Agricultural Engineering, vol. 2016, pp. 726-35. (2016). [Google Scholar]
- Staroselsky, A., and L. Anand. International Journal of Plasticity 19, 10, 1843-1864. (2003) [CrossRef] [Google Scholar]
- Lebedev, Anatoly, Boris Malyuchenko, and Dmitry Makarenko. Rural machine operator 4 12-13. (2012) [Google Scholar]
- Gulyaev, B. B., N. V. Kamyshanchenko, I. M. Neklyudov, A. M. Parshin, and E. I. Pryakhin. “Structure and properties of alloys.” (M: “Metallurgy 1993) [Google Scholar]
- Study of the kinetics of austenite decomposition under conditions of continuous cooling of economical alloyed steel for the production of large-diameter rolls // Krylov S.E., Yakunina O.A., Fot A.P., Antonov S.M., Rushchits S.V., Chumanov I.V. // Electrometallurgy. – 2013. – No. 10. – p. 31-36. [Google Scholar]
- Zastempowski, Marcin, and Andrzej Bochat. “Modeling of Cutting Process by the Star- Finger Cutting Block.” Applied Engineering in Agriculture 30, no. 3 (2014): 347. [Google Scholar]
- Begatov Yu.M. The influence of temperature on the quenching and release of nanostructure formation of die steels 4ХМФС and 4Х5МФ1С // Machine park. 2019. - No. 4. - p. 30. [Google Scholar]
- Berdiev D.M. Distinctive features of phase and structural transformations during high- temperature and thermal cycling treatment and their influence on increasing the wear resistance of steel products: Diss. doctoral technical science - Tashkent: Tashkent State Technical University, 2019. - 200 p. [Google Scholar]
- Norkhudzhaev F.R., Mukhamedov A.A., Kuznetsov A.M. Teshaboev, Zh.M. Usmonov, S.T. Parmonov. // Composite materials. 2020. - No. 4. - p.125-129. [Google Scholar]
- Norkhudzhaev F.R., Ergashev D.M., Shakhin A.M. Teshaboev. Composite materials. 2021 - No. 2. - With. 92-93. [Google Scholar]
- Norkhudzhaev F.R., Mukhamedov A.A., Ergashev D.M., Norkhudzhaeva R.F. Teshaboev. Influence of thermocyclic treatment modes on the structure formation of tool steels // Composite materials. 2021 - No. 1. - P.75-77. [Google Scholar]
- Norkhudzhaev.F.R., Dzhuraev M.A., Muminova D.S., Teshaboev A.M. International Journal of Advanced Sciences and Technologies Vol. 29. No. 7. [2020] p. 9285-9291. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.