Issue |
E3S Web Conf.
Volume 476, 2024
The 4th Aceh International Symposium on Civil Engineering (AISCE 2023)
|
|
---|---|---|
Article Number | 01008 | |
Number of page(s) | 12 | |
DOI | https://doi.org/10.1051/e3sconf/202447601008 | |
Published online | 17 January 2024 |
Seismic Performance of Iwf Flexural Link in Chevron Eccentrically Brace Frames (V-EBFs) with Different Stiffener Space
1 Master Student of Civil Engineering Department, Faculty of Engineering, University of Syiah Kuala Jalan Tengku Syech Abdurrauf No. 7, Darussalam, Banda Aceh 23111
2 Civil Engineering Department, Faculty of Engineering, University of Syiah Kuala Jalan Tengku Syech Abdurrauf No. 7, Darussalam, Banda Aceh 23111
3 Civil Engineering Department Nagoya University Furo-cho, Chikusa-ku, Nagoya, Japan 464-8601
a) Corresponding author: imron_civil@yahoo.com
Eccentrically Braced Frames (EBFs) are the structural systems that are recommended to be constructed in Earthquake Hazard Areas. This system combines good characteristics in withstanding the seismic load, i.e., stiffness, ductility, and dissipation energy. Link is a component in EBFs that play the role of the seismic energy dissipator. As far, several studies have been conducted to enhance the link performance, but the information is still limited. This study observed the structural performance of the IWF flexural link, where this link will experience failure at the flange due to seismic energy dissipation. The investigation was conducted by establishing three Finite Element (FE) models of flexural link. Each link was designed with the same length, i.e. 1000 mm. Three-link models were distinguished by the differences in web stiffener configuration, i.e., non-stiffener link, 250 mmstiffener spacing link, and 100 mm-stiffener spacing link, respectively. All models were examined under cyclic loading with yield displacement controlled. The research discovered that adding the web stiffener on the IWF flexural link significantly escalated the EBFs’ seismic performance, i.e., strength, stiffness, ductility, and dissipation energy. The best seismic performance was presented by a 100 mm-stiffener spacing link. Accordingly, it is indicated that arranging the web stiffeners at the narrow space in the IWF link can be suggested to improve the seismic performance of EBFs.
Key words: Chevron Eccentrically Braced Frames / flexural link / seismic performance / strength / stiffness / ductility / dissipation energy
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.