| Issue |
E3S Web Conf.
Volume 627, 2025
VI International Conference on Geotechnology, Mining and Rational Use of Natural Resources (GEOTECH-2025)
|
|
|---|---|---|
| Article Number | 05010 | |
| Number of page(s) | 10 | |
| Section | Infrastructure Problems of Mining Engineering, Transport, Electromechanics and Energy | |
| DOI | https://doi.org/10.1051/e3sconf/202562705010 | |
| Published online | 16 May 2025 | |
Determining the weight of factors affecting the TKPH of large-sized tires
1 Joint Stock Company "Navoi Mining and Metallurgical Company", Navoi, Uzbekistan
2 Tashkent State Transport University, Tashkent, Uzbekistan
* Corresponding author: umidyusupov20161978@gmail.com
Proper operation, timely inspection and regular maintenance can extend the service life of tires and reduce the cost of their replacement. When calculating the actual TKPH of tires, all global tire manufacturers and specialists at mining and metallurgical plants use a single formula. This formula takes into account only the average load on the tire, the average speed of the vehicle, the ambient temperature and the transportation distance. It does not take into account other factors, such as: the longitudinal slope of the route, the tire pressure, the road conditions, the type and composition of the tire rubber, the technical condition of the vehicle, the correct placement of the load on the body, the residual tread depth of the tires, etc. To create competitive tire designs, a comprehensive method for calculating the strength and thermal parameters, the development of new design methods and new experimental methods will be needed. This article presents an analysis of all the factors affecting the actual TKPH in quarry conditions, and based on the experimental results, the degree of significance of the influence of each factor on the TKPH of tires is determined.
© The Authors, published by EDP Sciences, 2025
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.