| Issue |
E3S Web Conf.
Volume 627, 2025
VI International Conference on Geotechnology, Mining and Rational Use of Natural Resources (GEOTECH-2025)
|
|
|---|---|---|
| Article Number | 05014 | |
| Number of page(s) | 7 | |
| Section | Infrastructure Problems of Mining Engineering, Transport, Electromechanics and Energy | |
| DOI | https://doi.org/10.1051/e3sconf/202562705014 | |
| Published online | 16 May 2025 | |
Analysis of fibrous material deformation in the roll contact zone
1 Tashkent University of Architecture and Civil Engineering, Yangi shahar street, 9, Tashkent city, 100194, Uzbekistan
2 Bukhara Institute of Engineering and Technology, Murtazaev street, 15, Bukhara, Uzbekistan
* Corresponding author: shavkat-xurramov59@mail.ru
The analytical description of the shape of contact curves and the thickness of processed material in the technological zone of a two-roll module in a dynamic mode is given, considering the deformation pattern of the processed material. It is determined that one of the factors that most influence the shape of the contact curve is the ratio of the compression rate of the coating deformation to the corresponding material feed rate. It is established that the minimum thickness of the material processed in a two- roll module depends on the initial thickness of the processed material, the gap between the rolls, and the ratio of the compression rate of the coating deformation to the corresponding material rate.
© The Authors, published by EDP Sciences, 2025
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.