| Issue |
E3S Web Conf.
Volume 548, 2024
X International Conference on Advanced Agritechnologies, Environmental Engineering and Sustainable Development (AGRITECH-X 2024)
|
|
|---|---|---|
| Article Number | 06014 | |
| Number of page(s) | 7 | |
| Section | Agricultural Mechanization, Civil Engineering and Energetics | |
| DOI | https://doi.org/10.1051/e3sconf/202454806014 | |
| Published online | 12 July 2024 | |
Mathematical description of the interaction process in a roll module
Tashkent University of Architecture and Civil Engineering, Tashkent, Uzbekistan
* Corresponding author: shavkat-xurramov59@mail.ru
An analysis of the shape of the contact arc in the roll module was performed for the case when changes in the thickness of the material and the roller coating at each point of the contact zone occur in the radial direction to the roller axis. Mathematical models of the shape of the contact arc of the roll module were developed. Particular mathematical models of the contact arc shape were obtained for the cases when the material being processed is absolutely elastic, elastic-viscous, and plastic. It was determined that the shape of the contact arc in the roll module depends primarily on the geometric and deformation properties of the roller material and the roller coating.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.