E3S Web Conf.
Volume 8, 2016Mineral Engineering Conference MEC2016
|Number of page(s)||1|
|Published online||16 September 2016|
Solvent extraction of scandium from lateritic nickel- cobalt ores using different organic reagents
1 Metallurgical and Materials Engineering, METU, 06800 Çankaya Ankara, Turkey
2 Meta Nikel Kobalt A.Ş. (Zorlu Group), 06520 Balgat Ankara, Turkey
a Corresponding author: firstname.lastname@example.org
Scandium is the most important and strategic metal that can be recovered as a by-product from lateritic nickel-cobalt ores. In this research, different extractants were investigated in order to extract scandium from a sulfate medium by a using a solvent extraction method. Generally, the organic extractants are classified as acidic, neutral and basic organophosphorus compounds. However, in solvent extraction of scandium, the acidic and neutral organophosphorus compounds are preferred due to their higher extraction efficiencies. Thus, the aim of the present study was to compare the scandium extraction efficiencies of some acidic and neutral organic reagents. For this reason, Ionquest 290 (Bis(2,4,4-trimethylpenthyl) phosphonic acid), DEHPA (Di(2-ethylhexyl) phosphoric acid), Cyanex 272 ((Bis(2,4,4-trimethylpentyl) phosphinic acid) which are acidic organophosphorus compounds, and Cyanex 923 (Trialkylphosphine oxide), which is a neutral organophosphorus compound, were used. The extraction capacities of these organics were studied with respect to the extractant concentration at same pH and phase ratio. As a result of the study, DEHPA was found to have higher scandium extraction efficiency with lower iron extraction at pH = 0.55 at a phase ratio of 10:1 = A:O.
© Owned by the authors, published by EDP Sciences, 2016
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.