| Issue |
E3S Web Conf.
Volume 8, 2016
Mineral Engineering Conference MEC2016
|
|
|---|---|---|
| Article Number | 01054 | |
| Number of page(s) | 6 | |
| DOI | https://doi.org/10.1051/e3sconf/20160801054 | |
| Published online | 16 September 2016 | |
Carbon dioxide sorption on EDTA modified halloysite
1 Głowny Instytut Gornictwa, Plac Gwarkow 40 – 166 Katowice Poland
2 Politechnika Sl aska, ul Akademicka 2, 41-100 Gliwice, Poland
a Corresponding author: Marcin.Lutynski@polsl.pl
In this paper the sorption study of CO2 on EDTA surface modified halloysite was conducted. In the paper chemical modification of halloysite from the Dunino deposit (Poland) and its influence on sorption of CO2 are presented. A halloysite samples were washed with water-EDTA 1% solution, centrifuged to separate liquid and impurities and dried. The samples were tested for the sorption capacity using a manometric method with pressure up to 3 MPa. A Langmuir adsorption model was fitted to the data. The results showed that EDTA had a limited effect on the increase of sorption potential at low pressure and the samples exhibited similar results to that ones treated solely with the water solution.
© Owned by the authors, published by EDP Sciences, 2016
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.