E3S Web Conf.
Volume 9, 20163rd European Conference on Unsaturated Soils – “E-UNSAT 2016”
|Number of page(s)||6|
|Section||Advances in Experimental Methods: Mechanical Properties|
|Published online||12 September 2016|
Thermal Volume Change of Unsaturated Silt under Different Stress States and Suction Magnitudes
University of California San Diego, Department of Structural Engineering, 9500 Gilman Dr, La Jolla, CA 92093-0085, USA
a Corresponding author: email@example.com
This paper presents an evaluation of the thermal volume change of compacted specimens of the same type of silt under a wide range of stress states, initial void ratios, and suction magnitudes. Stress states include both isotropic and anisotropic conditions with varying principal stress ratios, as well as normally consolidated and overconsolidated conditions. Initial void ratios range from 0.60 to 0.86, spanning very dense to loose conditions. Suctions evaluated range from saturated conditions, to low suctions in the funicular range, to suctions corresponding to residual saturation conditions. For the same soil, wide variations in thermal volume change are observed. Thermal contraction is observed for normally consolidated conditions regardless of the initial degree of saturation. Different mechanisms of thermal volume change can be used to explain the results, ranging from thermally-induced pore water pressure dissipation, to thermal collapse, to thermally-accelerated creep.
© The Authors, published by EDP Sciences, 2016
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.