| Issue |
E3S Web Conf.
Volume 14, 2017
Energy and Fuels 2016
|
|
|---|---|---|
| Article Number | 02032 | |
| Number of page(s) | 10 | |
| Section | Fuels | |
| DOI | https://doi.org/10.1051/e3sconf/20171402032 | |
| Published online | 15 March 2017 | |
The influence of fly ash zeolites fusion synthesis parameters on the received products
AGH University of Science and Technology, Kraków, Poland
* Corresponding author: nczuma@agh.edu.pl
Fly ash is one of possible raw material for the production of zeolites. Synthesis of zeolites with the use of fusion method enables the possibility of receiving materials of high yield of zeolites. This process may be used for efficient recycling of coal waste from power energy sector, which due to legislative indications shall no longer be directed into the landfills. The transformation of this waste into useful material of high application possibilities is possible. As received zeolites may be used eg. in purification of flue gases, which due to growing concern about the environment issues is needed. In the performed experiments the influence of a series of parameters was examined in correlation to received zeolitic material. Experimentally chosen proposition of the most beneficial process steps was presented.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.