E3S Web Conf.
Volume 17, 20179th Conference on Interdisciplinary Problems in Environmental Protection and Engineering EKO-DOK 2017
|Number of page(s)||7|
|Published online||24 May 2017|
Manometric measurements of temperature influence on Anammox activity
Wroclaw University of Science and Technology, Faculty of Environmental Engineering, Wybrzeze Wyspianskiego27, 50-370 Wroclaw, Poland
* Corresponding author: firstname.lastname@example.org
Wastewater treatment plants face more stringent effluent limits, especially with regard to total nitrogen, which force them to consider sidestream nitrogen removal from digested sludge dewatering liquor which can contain up to 20% of incoming nitrogen load. One of the most promising technologies for sidestream nitrogen removal is the deammonification process which is based on partial short-cut nitrification and the Anammox process. Anammox process is an anaerobic ammonia oxidation with nitrite conducted by slowly growing autotrophic bacteria. Ensuring adequate activity of sensitive Anammox bacteria is a key condition for effective deammonification. As the main product of Anammox bacteria is the nitrogen gas, the assessment of Anammox activity can be based on manometric measurements which are a relatively simple and cost-effective alternative to traditional tests involving determination of soluble nitrogen forms. This paper presents the principles of manometric method as well as results of temperature influence on Anammox activity obtained in a commercially available lab-scale set-up.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.