Issue |
E3S Web Conf.
Volume 17, 2017
9th Conference on Interdisciplinary Problems in Environmental Protection and Engineering EKO-DOK 2017
|
|
---|---|---|
Article Number | 00056 | |
Number of page(s) | 7 | |
DOI | https://doi.org/10.1051/e3sconf/20171700056 | |
Published online | 24 May 2017 |
Preliminary results of thermal comfort analysis in selected buildings
Kielce University of Technology, al., Tysiąclecia Państwa Polskiego 7, Kielce 25-314, Poland
* Corresponding author: majewskigrzegorz@wp.pl
The paper analyses thermal comfort in an intelligent building. Intelligent buildings are now widely seen both in Poland and abroad as a result of developments in engineering sciences. However, data on the thermal comfort provided in the buildings are limited. The research described in this paper was carried out in ENERGIS intelligent building of the Kielce University of Technology. The parameters measured included air temperature, relative air humidity, air flow rate and carbon dioxide concentration. Average radiation temperature was determined. The key element was the study of thermal sensation in occupants present at the time of the measurements. The studies were performed in classrooms during the class. The students completed a questionnaire at the beginning and end of the class. The persons present in the classrooms evaluated their thermal sensations using a seven-level thermal comfort scale. The questionnaire included such questions as the type of clothing and the degree of physical activity of the people sitting in the classroom. On the basis of the measurements of classroom microclimate parameters, PMV (Predicted Mean Vote) and PPD (Predicted Percentage Dissatisfied) indices were determined. The responses from the questionnaires provided actual average assessment of thermal sensation and actual percentage of dissatisfied people.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.