| Issue |
E3S Web Conf.
Volume 44, 2018
10th Conference on Interdisciplinary Problems in Environmental Protection and Engineering EKO-DOK 2018
|
|
|---|---|---|
| Article Number | 00021 | |
| Number of page(s) | 8 | |
| DOI | https://doi.org/10.1051/e3sconf/20184400021 | |
| Published online | 03 July 2018 | |
The PMV and PPD indices in the selected boiler room
Institute of Environmental Engineering and Building Installations - Lodz University of Technology, al. Politechniki 6, 90-924 Lodz, Poland
* Corresponding author : robert.cichowicz@p.lodz.pl
Thermal microclimate in a boiler room is formed by factors resulting from thermal processes that are taking place in combustion units. These factors are negatively affecting the indoor environment by worsening the air quality, and therefore it is crucial to maintain adequate air parameters in the room. It is a consequence of the fact that in the boiler room the operation of technological equipment results in an exposure of workers to adverse effects caused by thermal factors. Therefore, the evaluation of thermal conditions in the work area of people was made for the selected industrial boiler room using PMV and PPD indices (which allow to determine the thermal sensation of employees, regarding their surrounding thermal environment, based on the methodology of ISO 7730 standard). The analysis was based on own experimental measurements and numerical calculations made in the DesignBuilder program.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.