| Issue |
E3S Web Conf.
Volume 17, 2017
9th Conference on Interdisciplinary Problems in Environmental Protection and Engineering EKO-DOK 2017
|
|
|---|---|---|
| Article Number | 00087 | |
| Number of page(s) | 9 | |
| DOI | https://doi.org/10.1051/e3sconf/20171700087 | |
| Published online | 24 May 2017 | |
The influence of the ground parameters’ assumptions on the low enthalpy heat pump’s energy source simulation’s results
Wrocław University of Science and Technology, Faculty of Environmental Engineering, 27 Wybrzeże Wyspiańskiego St., 50-370 Wrocław, Poland
* Corresponding author: natalia.fidorow@pwr.edu.pl
In the paper the simulations of the low enthalpy energy source for brine-to-water heat pump using EED software had been presented. Authors indicated the influence of the ground parameters’ assumptions on the low enthalpy heat pump’s energy source simulation’s results. Based on the real borehole geological profile and data available in literature, the ground thermal conductivity coefficients have been calculated making different assumptions concerning the ground thermal properties. The calculated ground thermal conductivity coefficients along with the calculated source sizes, heat pump parameters and the heated building thermal performance served as the input data for the simulation software. The outcomes of the analyses include the temperatures of brine entering the heat pump as well as the brine initial temperature. Outcomes served for the low enthalpy energy source performance evaluation.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.