| Issue |
E3S Web Conf.
Volume 18, 2017
Mineral Engineering Conference MEC2017
|
|
|---|---|---|
| Article Number | 01017 | |
| Number of page(s) | 5 | |
| DOI | https://doi.org/10.1051/e3sconf/201712301017 | |
| Published online | 04 October 2017 | |
Studies on the separation of some transition metals using trialkylimidazole as selective extractant
Faculty of Chemical Technology and Engineering, UTP University of Sciences and Technology, Seminaryjna 3, PL-85326 Bydgoszcz, Poland
* e-mail: elaradz@utp.edu.pl
The possibility of Cu(II) ion separation from an equimolar Cu-Cd-Zn tertiary mixture by solvent extraction was investigated. The process was based on the use of 1,2,4-trimethylimidazole (TMI) and 1- decyl-2,4-dimethylimidazole (DDMI) as extractant. Dichloromethane was used as the solvent in the extraction process. The dissociation constant of extractants were found potentiometrically. Extraction data were used for finding stability constants and partition constants for the complexes being formed in the aqueous solution. For TMI, separation coefficients for Cu(II) with regard to zinc and cadmium are 2.9 and 1.3, respectively. For DDMI separation coefficients for Cu(II) with regard to zinc and cadmium are 1.4 and 1.6, respectively. Sparingly soluble in water 1-decyl-2,4-dimethylimidazole is a more useful extractant.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.