E3S Web of Conferences

Open Access

Advanced separation technologies for pre-concentration of metal ores and the additional process control 01001

Jacek Kolacz

Published online: 04 October 2017

DOI: https://doi.org/10.1051/e3sconf/201712301001

• PDF (298.5 KB)
• References

Open Access

The influence of lead on concentrates quality produced in KGHM Polska Miedz concentrator plants 01002

Witold Pawlos and Małgorzata Krzemińska

Published online: 04 October 2017

DOI: https://doi.org/10.1051/e3sconf/201712301002

• PDF (643.9 KB)
• References

Open Access

The importance of middlings in the beneficiation technology of Polish copper ore and new possibilities of their processing 01003

Bozena Skorupska, Andrzej Wieniewski and Norbert Kubacz

Published online: 04 October 2017

DOI: https://doi.org/10.1051/e3sconf/201712301003

• PDF (378.2 KB)
• References

Open Access

Research on the Possibility of Sorting Application for Separation of Shale and/or Gangue from the Feed of Rudna Concentrator 01004

Andrzej Grotowski and Kajetan Witecki

Published online: 04 October 2017

DOI: https://doi.org/10.1051/e3sconf/201712301004

• PDF (183.9 KB)
• References

Open Access

A multidimensional analysis and modelling of flotation process for selected Polish lithological copper ore types 01005

Tomasz Niedoba, Agnieszka Surowiak and Paulina Pięta

Published online: 04 October 2017

DOI: https://doi.org/10.1051/e3sconf/201712301005

• PDF (815.6 KB)
• References

Open Access

Evaluation of flotation process course on the example of sulphide ores 01006

Konrad Oleksik, Daniel Saramak and Anna MŁynarczykowska

Published online: 04 October 2017

DOI: https://doi.org/10.1051/e3sconf/201712301006

• PDF (400.3 KB)
• References

Open Access

The effect of process water salinity on flotation of copper ore from Lubin mining region (SW Poland) 01007

Alicja Bakalarz, Magdalena Duchnowska and Andrzej Luszczkiewicz

Published online: 04 October 2017

DOI: https://doi.org/10.1051/e3sconf/201712301007

• PDF (1.012 MB)
• References

Open Access

Possibilities for reusing the waste from the process of Zn-Pb ore beneficiation 01008

Krystian Cichy, Kornel Tobiczyk, Arkadiusz Mańka, Grażyna Pajor and Cezary ReguŁa

Published online: 04 October 2017

DOI: https://doi.org/10.1051/e3sconf/201712301008

• PDF (185.6 KB)

Open Access

Evaluation of frothers based on properties of the solids/liquid/gas system 01009

Jan Drzymala

Published online: 04 October 2017

DOI: https://doi.org/10.1051/e3sconf/201712301009

• PDF (206.0 KB)
• References

Open Access

Dynamic aspects of design and maintenance of the rotating machinery applied in the mining industry 01010

Tomasz Szolc, Robert Konowrocki, Andrzej Pochanke and Maciej MichajŁow

Published online: 04 October 2017

DOI: https://doi.org/10.1051/e3sconf/201712301010

• PDF (1.190 MB)
• References

Open Access

Two-stage method for the simulation of the comminution process in a high-speed beater mill 01011

Michał J. Marijnissen, Cezary Graczykowski and Jerzy Rojek

Published online: 04 October 2017

DOI: https://doi.org/10.1051/e3sconf/201712301011

• PDF (840.0 KB)
• References

Open Access

Analysis of a grinding efficiency in the electromagnetic mill for variable process and feed parameters 01012

Marta Wołosiewicz-Głąb, Dariusz Foszcz, Daniel Saramak, Tomasz Gawenda and Damian Krawczykowski

Published online: 04 October 2017

DOI: https://doi.org/10.1051/e3sconf/201712301012

• PDF (715.6 KB)
• References

Open Access

Effect of some operating variables on the performance of a 150 mm Heavy Medium Cyclone treating high ash Indian Coking Coal 01013

Thonangi Gouri Charan, G.S. Jha, K.M.K. Sinha, U.S. Chattopadhyay and Kalyan Sen

Published online: 04 October 2017

DOI: https://doi.org/10.1051/e3sconf/201712301013

• PDF (151.6 KB)
• References

Open Access

Reuse of Cement Kiln Dust for backfilling and CO₂ carbonation 01014

Marcin Lutyński and Piotr Pierzyna

Published online: 04 October 2017

DOI: https://doi.org/10.1051/e3sconf/201712301014

• PDF (421.7 KB)
• References

Open Access

An update on possibilities of metals recovery from Polish copper ores by biotechnology. Project Ecometals 01015

Agnieszka Szubert, Anne-Gwénaëlle Guezennec, Françoise Bodénan, Stefan Dirlich, Agnieszka Pawłowska, Andrzej Grotowski, Zygmunt Sadowski and Kajetan Witecki

Published online: 04 October 2017

DOI: https://doi.org/10.1051/e3sconf/201712301015

• PDF (254.4 KB)
• References

Open Access

Studies of the aromatic β-diketones as extractant of copper ions 01016

Katarzyna Witt and Elzbieta Radzyminska-Lenarcik

Published online: 04 October 2017

DOI: https://doi.org/10.1051/e3sconf/201712301016

• PDF (778.9 KB)
• References

Open Access

Studies on the separation of some transition metals using trialkylimidazole as selective extractant 01017

Elzbieta Radzyminska-Lenarcik and Katarzyna Witt

Published online: 04 October 2017

DOI: https://doi.org/10.1051/e3sconf/201712301017

• PDF (186.1 KB)
• References

Open Access

The uptake of silver(I) from chloride solutions by amine extractants 01018

Katarzyna Wejman and Magdalena Pilśniak-Rabiega

Published online: 04 October 2017

DOI: https://doi.org/10.1051/e3sconf/201712301018

• PDF (214.2 KB)
• References

Open Access

The sorption of metal ions on nanoscale zero-valent iron 01019

Tomasz Suponik, Marcin Popczyk and Piotr Pierzyna

Published online: 04 October 2017

DOI: https://doi.org/10.1051/e3sconf/201712301019

• PDF (207.4 KB)
• References

Open Access

Considerations about recovery of critical metals using bio-metallurgy 01020

Săndica Liliana Gherghe

Published online: 04 October 2017

DOI: https://doi.org/10.1051/e3sconf/201712301020

• PDF (168.6 KB)
• References

Open Access

Environmentally friendly method for regeneration of copper chloride acidic solutions used in etching of printed circuits 01021

Dorota Kopyto, Wit Baranek, Zbigniew Myczkowski, Katarzyna Leszczyńska-Sejda, Michał Drzazga, Maciej Matusewicz, Tadeusz Matusewicz and Wojciech Matusewicz

Published online: 04 October 2017

DOI: https://doi.org/10.1051/e3sconf/201712301021

• PDF (482.5 KB)
• References

Open Access

Romanian bentonite and fly ash characterization and their use in heavy metal “in-situ” immobilization in polluted soils 01022

Săndica Liliana Gherghe, Ildiko Anger, Georgiana Moise and Roxana Trusca

Published online: 04 October 2017

DOI: https://doi.org/10.1051/e3sconf/201712301022

• PDF (1.301 MB)
• References

Open Access

Sulfur reduction in Sangan iron ore by flotation 01023

Bahram Rezaee, Atefe Sarvi, Atiyeh Eslamian, Seyed MehdiJebraeeli and Abolfazl Zabihi

Published online: 04 October 2017

DOI: https://doi.org/10.1051/e3sconf/201712301023

• PDF (261.1 KB)
• References

Open Access

Circular Economy in Mineral Processing 01024

Radosław Pomykała and Barbara Tora

Published online: 04 October 2017

DOI: https://doi.org/10.1051/e3sconf/201712301024

• PDF (168.4 KB)
• References

Open Access

Influence of liberation of sulphide minerals on flotation of sedimentary copper ore 01025

Alicja Bakalarz, Magdalena Duchnowska and Andrzej Luszczkiewicz

Published online: 04 October 2017

DOI: https://doi.org/10.1051/e3sconf/201712301025

• PDF (354.3 KB)
• References

Open Access

Solidification of hazardous waste as a part of the raw material recovery process 01026

Daria Polek

Published online: 04 October 2017

DOI: https://doi.org/10.1051/e3sconf/201712301026

• PDF (153.9 KB)
• References

Open Access

Silver recovery from zinc metallurgical sludge – analysis of solutions 01027

Stanisław Pietrzyk, Piotr Palimąka, Michał Stępień, Aldona Krawczykowska, Barbara Tora, Mirosław Fatyga, Grażyna Pajor and Arkadiusz Mańka

Published online: 04 October 2017

DOI: https://doi.org/10.1051/e3sconf/201712301027

• PDF (590.0 KB)
• References

Open Access

Flotation of copper-bearing shale in solutions of inorganic salts and organic reagents 01028

Tomasz Ratajczak

Published online: 04 October 2017

DOI: https://doi.org/10.1051/e3sconf/201712301028

• PDF (163.4 KB)
• References

Open Access

Effect of fly and bottom ash mixture from combustion of biomass on strength of cement mortar 01029

Małgorzata Ulewicz and Jakub Jura

Published online: 04 October 2017

DOI: https://doi.org/10.1051/e3sconf/201712301029

• PDF (275.9 KB)
• References

Open Access

Evaluation of the results of coal jigging process 01030

Agnieszka Surowiak

Published online: 04 October 2017

DOI: https://doi.org/10.1051/e3sconf/201712301030

• PDF (577.9 KB)
• References

Open Access

Physical chemical characterization of historical mining waste and ARD prediction tests 01031

Antoneta Filcenco-Olteanu, Lena Alakangas, Antoio Fiuza, Marius Zlagnean and Nicolae Tomus

Published online: 04 October 2017

DOI: https://doi.org/10.1051/e3sconf/201712301031

• PDF (551.1 KB)
• References

Open Access

Possibilities of use of waste sulfur for the production of technical concrete 01032

Łukasz Grabowski, Maciej Gliniak and Daria Polek

Published online: 04 October 2017

DOI: https://doi.org/10.1051/e3sconf/201712301032

• PDF (148.3 KB)
• References

Open Access

Testing the possibility of leaching salt debris obtained from underground excavations 01033

Piotr Pierzyna, Marcin Popczyk and Tomasz Suponik

Published online: 04 October 2017

DOI: https://doi.org/10.1051/e3sconf/201712301033

• PDF (719.1 KB)
• References

Open Access

The influence of ultrasounds on the process of uranium desorption 01034

Eugenia Panturu, Antoneta Filcenco-Olteanu, Aura Daniela Radu and Marius Zlagnean

Published online: 04 October 2017

DOI: https://doi.org/10.1051/e3sconf/201712301034

• PDF (2.235 MB)
• References

Open Access

Impact of spiral separator geometrical parameters on the density separation of various fine-grained materials 01035

Jan Szpyrka, Tomasz Suponik and Marcin Lutyński

Published online: 04 October 2017

DOI: https://doi.org/10.1051/e3sconf/201712301035

• PDF (184.1 KB)
• References