Issue |
E3S Web Conf.
Volume 19, 2017
International Conference Energy, Environment and Material Systems (EEMS 2017)
|
|
---|---|---|
Article Number | 01001 | |
Number of page(s) | 7 | |
Section | Energy | |
DOI | https://doi.org/10.1051/e3sconf/20171901001 | |
Published online | 23 October 2017 |
Comparison of low frequency signals emitted by wind turbines of two different generator types
1 KFB Polska Spółka z o.o., ul. Mydlana 7, 51-502 Wrocław, Poland
2 Opole University of Technology, ul. Prós zkowska 76, 45-758 Opole, Poland
⁎ Corresponding author: t.boczar@po.opole.pl
Paper presents results of comparative analysis of infrasound noise generated by wind turbines of two types: asynchronous type REPOWER MM92 with power equal to 2 MW and synchronous type Vensys 62 with power equal to 1.2 MW. Frequency spectra of sound pressure levels generated during operation by both turbines for exemplary chosen wind speed values are depicted. Within the shown spectra the resonant frequencies have been indicated, for which sound pressure variations over time are shown. Based on the achieved frequency spectra it was stated that in general the asynchronous type turbine produces lower pressure levels, which are less stable over time, and indicates higher pressure values around the resonant frequencies as compared to the synchronous type turbine. Also it was stated that the asynchronous type turbine is more influenced by the wind conditions and generates higher pressure values by higher wind speeds then the synchronous type turbine. The main contribution of this paper lies in indication that the type of wind turbine generator has significant impact on the level of infrasound noise emitted to the environment.
© The authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.