| Issue |
E3S Web Conf.
Volume 19, 2017
International Conference Energy, Environment and Material Systems (EEMS 2017)
|
|
|---|---|---|
| Article Number | 02019 | |
| Number of page(s) | 8 | |
| Section | Environment | |
| DOI | https://doi.org/10.1051/e3sconf/20171902019 | |
| Published online | 23 October 2017 | |
Leaching of heavy metals from cementitious composites made of new ternary cements
1 Institute of Ceramics and Building Materials, Opole, Poland
2 Opole University of Technology, Opole, Poland
⁎ Corresponding author: j.kuterasinska@icimb.pl
The paper presents a comparison of research methods concerning the leaching of harmful substances (selected heavy metal cations ie. Pb, Cu, Zn and Cr) and their degree of immobilization in cement matrices. The new types of ternary cements were used in the study, where a large proportion of cement clinker was replaced by other non-clinker components - industrial wastes, ie. siliceous fly ash from power industry and granulated blast furnace slag from the iron and steel industry. In studied cementitious binders also ground limestone was used, which is a widely available raw material. The aim of research is determining the suitability of new cements for neutralizing harmful substances in the obtained matrices. The application of two research methods in accordance with EN 12457-4 and NEN 7275 intends to reflection of changing environmental conditions whom composite materials may actually undergo during their exploitation or storing on landfills. The results show that cements with high addition of non-clinker components are suitable for stabilization of toxic substances and the obtained cement matrices retain a high degree of immobilization of heavy metals at the level of 99%.
© The authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.