Issue |
E3S Web Conf.
Volume 19, 2017
International Conference Energy, Environment and Material Systems (EEMS 2017)
|
|
---|---|---|
Article Number | 02029 | |
Number of page(s) | 8 | |
Section | Environment | |
DOI | https://doi.org/10.1051/e3sconf/20171902029 | |
Published online | 23 October 2017 |
Health-risk assessment based on an additive to paints made from isobutyric aldehyde condensation products
Opole University of Technology, Department of Environmental Engineering, Mikołajczyka 5 Street, 45-227 Opole, Poland
⁎ Corresponding author: w.tic@po.opole.pl
Solvents are primarily used for making protective coatings. Considering their chemical nature, there are a great variety of coatings, including those based on liquid hydrocarbons and organic chloroderivatives. These products are a serious load to the environment because of their physicochemical properties, therefore, they have for some time been replaced with more-environmentally friendly, new generation products. One of them is the hydroxyester HE-1: made from isobutyric aldehyde condensation products, it is an alternative to those coalescents for paints and varnishes which are intended to be replaced or their use restricted.
The results of selected toxicological tests relating to the human health risk effect of the hydroxyester HE-1 – environmentally-friendly additive to paints and varnishes are presented. The test results indicate that HE-1 causes skin irritation in rabbit only when used at its maximum concentrations. No lesions in the cornea or iris were observed in any of the test rabbits after the application of the hydroxyester HE-1. In the mutagenic effect test of HE-1 on the bacteria Salmonella typhimurium, the result was negative. Based on the test results, it was found that the hydroxyester HE-1 may only have a human health risk effect when used at its maximum concentrations.
© The authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.