Issue |
E3S Web Conf.
Volume 19, 2017
International Conference Energy, Environment and Material Systems (EEMS 2017)
|
|
---|---|---|
Article Number | 03022 | |
Number of page(s) | 5 | |
Section | Materials | |
DOI | https://doi.org/10.1051/e3sconf/20171903022 | |
Published online | 23 October 2017 |
Numerical analysis of the states of stress in the steel-titanium bimetal during cyclic bending
1 Opole University of Technology, ul. Mikolajczyka 5, 45-270 Opole, Poland
2 University of Science and Technology in Bydgoszcz, Al. prof. S. Kaliskiego 7, 85-796 Bydgoszcz, Poland
⁎ Corresponding author: g.robak@po.opole.pl
This paper presents the results of experimental study into steel-titanium bimetal obtained by means of explosive welding, which involved the development of fatigue cracks. A particular emphasis in the report was placed on the analysis of development of the crack in the area in which the two metals are joined. The study was accompanied by a numerical analysis of the distribution of stresses in the weld area in terms of the elastic-plastic characteristics. The numerical analysis performed in terms of the elastic-plastic characteristics demonstrated that the titanium layer is completely plasticized as a result of the acting loading, when the crack is still located in the steel part of the examined plater.
© The authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.