Issue |
E3S Web Conf.
Volume 21, 2017
IInd International Innovative Mining Symposium (Devoted to Russian Federation Year of Environment)
|
|
---|---|---|
Article Number | 03018 | |
Number of page(s) | 8 | |
Section | Innovations in Mining Machinery | |
DOI | https://doi.org/10.1051/e3sconf/20172103018 | |
Published online | 10 November 2017 |
Factors Determining the Size of Sealing Clearance in Hydraulic Legs of Powered Supports
T.F. Gorbachev Kuzbass State Technical University, 650000, 28 Vesennyaya St., Kemerovo, Russia
* Corresponding author: gdb@kuzstu.ru
The factors that directly influence the formation of a sealing clearance between the piston and the working cylinder in hydraulic legs of powered supports are considered in this article, the size thereof has a direct effect on the tightness of the legs and, as a result, on the safety of work at the production face. A detailed description of these factors is given, which is supported by the dependencies obtained from the results of finite element modeling of various types of legs under various strength and geometric parameters, external load types and locations in the support section. The problems of formation of radial deformations of a working cylinder loaded with working fluid pressure are considered, and their dependence on the level of this pressure and extension. Based on the simulation results, the mechanisms for the formation of additional clearances due to rod and cylinder misalignments are described, and the conditions and causes of the resonant phenomena development are given. The classification of these factors according to the degree of generalization and the functional interaction between each other is proposed.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.