E3S Web Conf.
Volume 41, 2018IIIrd International Innovative Mining Symposium
|Number of page(s)||6|
|Section||Environment Saving Mining Technologies|
|Published online||26 June 2018|
Factors Determining Operation of Lip Seal in the Sealed Gap of the Hydraulic Props of Powered Supports
T.F. Gorbachev Kuzbass State Technical University, Underground Mining Department,
Vesennya st. 28,
2 JSC «SUEK-Kuzbass», Vasilyeva street 1, Leninsk-Kuznetsky, 652507, Russian Federation
* Corresponding author: firstname.lastname@example.org
The article considers the factors that directly influence the operation of the lip seals to seal the gap between the piston and the working cylinder in hydraulic props of mechanized supports, this directly affects the tightness of the props and, as a consequence, the safety of work in the production face. A description is given of these factors, which is supported by practical calculations obtained from the results of finite element modeling of lip seals of various designs at different pressures of the working fluid and sealed gaps. The problems of sealing rough surfaces with rubber-like materials are considered. The classification of these factors according to the degree of generalization and the functional interaction between each other is proposed.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Initial download of the metrics may take a while.